Self-Services
Self-Service Resources for KESZING Products
USER MANUAL
Coming Soon
User Manual Not Yet Available
The user manual for this model is currently being prepared. Please check back later for updated support resources.
Coming Soon
User Manual Not Yet Available
The user manual for this model is currently being prepared. Please check back later for updated support resources.
Coming Soon
User Manual Not Yet Available
The user manual for this model is currently being prepared. Please check back later for updated support resources.
Coming Soon
User Manual Not Yet Available
The user manual for this model is currently being prepared. Please check back later for updated support resources.
VIDEO
Coming Soon
Video Not Yet Available
The product video for this model is currently being prepared. Please check back later for updated support resources.
Coming Soon
Video Not Yet Available
The product video for this model is currently being prepared. Please check back later for updated support resources.
Coming Soon
Video Not Yet Available
The product video for this model is currently being prepared. Please check back later for updated support resources.
Coming Soon
Video Not Yet Available
The product video for this model is currently being prepared. Please check back later for updated support resources.
KESZING LXMT001 Inflatable Water Scooter Demo Video
Coming Soon
Video Not Yet Available
The product video for this model is currently being prepared. Please check back later for updated support resources.
Coming Soon
Video Not Yet Available
The product video for this model is currently being prepared. Please check back later for updated support resources.
Coming Soon
Video Not Yet Available
The product video for this model is currently being prepared. Please check back later for updated support resources.
FAQ
Yes. In addition to underwater propulsion, the LXHD 7-1 is designed with mounting provisions for compatible KESZING inflatable boats, paddle boards, and other watercraft.
The LXHD 7-1 features 10 speed levels. Rotate the speed control ring on the right handle to adjust the speed. Each level changes the displayed power setting by 10%.
Press the power button on the control panel to turn the LXHD 7-1 on or off.
A full charge takes approximately 4 hours under normal charging conditions.
The display shows the remaining battery percentage, allowing you to monitor the battery level during operation.
The recommended ambient charging temperature is 5°C to 40°C (41°F to 104°F).
Yes, but battery performance decreases significantly below 0°C (32°F). This may reduce power output and shorten the operating time.
Do not operate the LXHD 7-1 out of water for more than 10 seconds. Prolonged dry running may shorten motor life. If you notice any abnormal condition, stop the unit immediately and disconnect the power system.
Rinse the unit with clean water after use, remove dirt, sand, or residue, shake off excess water, and wipe it with a clean, dry cloth. Allow it to air-dry in a well-ventilated area. Do not use a hair dryer, heating equipment, or direct sunlight to accelerate drying.
Store the unit in a cool, dry, and well-ventilated environment. For long-term storage, check the battery at least once every 2 months and maintain the battery charge level at 60% or above.
Yes. In addition to underwater propulsion, the LXHD 7-3 is designed with mounting provisions for compatible KESZING inflatable boats, paddle boards, and other watercraft.
The LXHD 7-3 features 10 speed levels. Rotate the speed control ring on the right handle to adjust the speed. Each level changes the displayed power setting by 10%.
Press the power button on the control panel to turn the LXHD 7-3 on or off.
A full charge takes approximately 4 hours under normal charging conditions.
The display shows the remaining battery percentage, allowing you to monitor the battery level during operation.
The recommended ambient charging temperature is 5°C to 40°C (41°F to 104°F).
Yes, but battery performance decreases significantly below 0°C (32°F). This may reduce power output and shorten the operating time.
Do not operate the LXHD 7-3 out of water for more than 10 seconds. Prolonged dry running may shorten motor life. If you notice any abnormal condition, stop the unit immediately and disconnect the power system.
Rinse the unit with clean water after use, remove dirt, sand, or residue, shake off excess water, and wipe it with a clean, dry cloth. Allow it to air-dry in a well-ventilated area. Do not use a hair dryer, heating equipment, or direct sunlight to accelerate drying.
Store the unit in a cool, dry, and well-ventilated environment. For long-term storage, check the battery at least once every 2 months and maintain the battery charge level at 60% or above.
Yes. In addition to underwater propulsion, the LXHD 5-2 is designed with mounting provisions for compatible KESZING inflatable boats, paddle boards, and other watercraft.
The LXHD 5-2 features 10 speed levels. Rotate the speed control ring on the right handle to adjust the speed. Each level changes the displayed power setting by 10%.
Press the power button on the control panel to turn the LXHD 5-2 on or off.
A full charge takes approximately 4 hours under normal charging conditions.
The display shows the remaining battery percentage, allowing you to monitor the battery level during operation.
The recommended ambient charging temperature is 5°C to 40°C (41°F to 104°F).
Yes, but battery performance decreases significantly below 0°C (32°F). This may reduce power output and shorten the operating time.
Do not operate the LXHD 5-2 out of water for more than 10 seconds. Prolonged dry running may shorten motor life. If you notice any abnormal condition, stop the unit immediately and disconnect the power system.
Rinse the unit with clean water after use, remove dirt, sand, or residue, shake off excess water, and wipe it with a clean, dry cloth. Allow it to air-dry in a well-ventilated area. Do not use a hair dryer, heating equipment, or direct sunlight to accelerate drying.
Store the unit in a cool, dry, and well-ventilated environment. For long-term storage, check the battery at least once every 2 months and maintain the battery charge level at 60% or above.
Yes. In addition to underwater propulsion, the LXHD 5-3 is designed with mounting provisions for compatible KESZING inflatable boats, paddle boards, and other watercraft.
The LXHD 5-3 features 10 speed levels. Rotate the speed control ring on the right handle to adjust the speed. Each level changes the displayed power setting by 10%.
Press the power button on the control panel to turn the LXHD 5-3 on or off.
A full charge takes approximately 4 hours under normal charging conditions.
The display shows the remaining battery percentage, allowing you to monitor the battery level during operation.
The recommended ambient charging temperature is 5°C to 40°C (41°F to 104°F).
Yes, but battery performance decreases significantly below 0°C (32°F). This may reduce power output and shorten the operating time.
Do not operate the LXHD 5-3 out of water for more than 10 seconds. Prolonged dry running may shorten motor life. If you notice any abnormal condition, stop the unit immediately and disconnect the power system.
Rinse the unit with clean water after use, remove dirt, sand, or residue, shake off excess water, and wipe it with a clean, dry cloth. Allow it to air-dry in a well-ventilated area. Do not use a hair dryer, heating equipment, or direct sunlight to accelerate drying.
Store the unit in a cool, dry, and well-ventilated environment. For long-term storage, check the battery at least once every 2 months and maintain the battery charge level at 60% or above.
Yes. The LXMT001 is designed to support compatible KESZING thrusters for electric propulsion.
The LXMT001 is suitable for calm freshwater areas with gentle currents, as well as coastal or marine waters with relatively small waves.
Yes. The LXMT001 can be inflated for use and deflated for storage or transport. After deflation, it can be folded into a more compact size.
The standard package includes 1 inflatable boat, 1 paddle, 1 steering wheel set, 1 manual air pump, and 1 repair kit.
Yes. A properly fitted life jacket should be worn whenever the boat is used on the water to help reduce safety risks.
Keep the boat clean and dry before storage. Store it in a dry, well-ventilated area and avoid placing heavy objects on top of the folded boat.
Yes. The LXMT002 is designed to support compatible KESZING thrusters for electric propulsion.
The LXMT002 is suitable for calm freshwater areas with gentle currents, as well as coastal or marine waters with relatively small waves.
Yes. The LXMT002 can be inflated for use and deflated for storage or transport. After deflation, it can be folded into a more compact size.
The standard package includes 1 inflatable boat, 1 paddle, 1 steering wheel set, 1 manual air pump, and 1 repair kit.
Yes. A properly fitted life jacket should be worn whenever the boat is used on the water to help reduce safety risks.
Keep the boat clean and dry before storage. Store it in a dry, well-ventilated area and avoid placing heavy objects on top of the folded boat.
Yes. The LXMT003 is designed to support compatible KESZING thrusters for electric propulsion.
The LXMT003 is suitable for calm freshwater areas with gentle currents, as well as coastal or marine waters with relatively small waves.
Yes. The LXMT003 can be inflated for use and deflated for storage or transport. After deflation, it can be folded into a more compact size.
Yes. A properly fitted life jacket should be worn whenever the boat is used on the water to help reduce safety risks.
Keep the boat clean and dry before storage. Store it in a dry, well-ventilated area and avoid placing heavy objects on top of the folded boat.
The model is OBLM4990 series, which is a 3-phase sensorless outer rotor brushless motor.
Its operating voltage is 27.5 VDC.
The KV is 290, and the no-load speed is 7960 ±10% RPM.
The maximum load current is 36A.
The maximum power reaches 800W.
It is specially used as the driving brushless motor for underwater scooters / underwater thrusters.
It is a three-phase sensorless outer rotor brushless motor.